Is Honeycomb down in Australia?
Vendor reports no incidentWhat Honeycomb reports
Honeycomb reports no incident on its status page.
As of the last successful poll, 2026-11-06 16:29 UTC.
Our regional reading
This is our own reading from outside, shown beside the vendor's statement. It is not counted as a separate outage.
Checks passingin Australia, measured from Sydney
Our Sydney probe last checked Honeycomb at Nov 6, 2026, 4:06 PM UTC and read checks passing.
Over the last 24 hours we completed 24 checks from Sydney and 24 answered cleanly, 100.00% availability.
Of the 9 other regions we check Honeycomb from, all 9 read checks passing right now.
Email me when Honeycomb reports an incident on its status page, and again when it reports it resolved.
What our Sydney probe measured
Last checked Nov 6, 2026, 4:06 PM UTC.
Honeycomb from Sydney over the last 30 days
Over the last 30 days, Honeycomb answered our Sydney probe in 1,379 ms on average, and 1 check in 20 took longer than 1,905 ms.
Ranked by average response time across the 10 cities we check Honeycomb from, Sydney 9th; Chicago was fastest at 439 ms and Singapore slowest at 1,497 ms.
From Sydney we ran 714 checks of Honeycomb in 30 days, and 713 answered cleanly: 99.85% availability.
1 of the 30 days had at least one failed check. The weakest was Oct 16 (UTC), at 95.83% across 24 checks.
In Sydney local time (GMT+11), Honeycomb was slowest around 12 PM, at 1,623 ms on average over the last 14 days, and quickest around 5 AM, at 1,155 ms.
| Day (UTC) | Checks | Availability | Average response |
|---|---|---|---|
| Fri, Nov 6 | 17 | 100.00% | 1,616 ms |
| Thu, Nov 5 | 23 | 100.00% | 1,656 ms |
| Wed, Nov 4 | 24 | 100.00% | 1,754 ms |
| Tue, Nov 3 | 24 | 100.00% | 1,446 ms |
| Mon, Nov 2 | 24 | 100.00% | 1,260 ms |
| Sun, Nov 1 | 24 | 100.00% | 1,195 ms |
| Sat, Oct 31 | 24 | 100.00% | 1,199 ms |
| Fri, Oct 30 | 24 | 100.00% | 1,505 ms |
| Thu, Oct 29 | 24 | 100.00% | 1,501 ms |
| Wed, Oct 28 | 24 | 100.00% | 1,222 ms |
| Tue, Oct 27 | 24 | 100.00% | 1,342 ms |
| Mon, Oct 26 | 24 | 100.00% | 1,216 ms |
| Sun, Oct 25 | 24 | 100.00% | 1,206 ms |
| Sat, Oct 24 | 24 | 100.00% | 1,178 ms |
Honeycomb outages measured from Australia
Our Sydney probe measured no confirmed Honeycomb outage in the last 90 days.
How the other regions read right now
Of the 9 other regions we check Honeycomb from, all 9 read checks passing right now.
| Probe city | Right now | Last 24h |
|---|---|---|
| Ashburn | Checks passing | 100.00% of 48 checks |
| San Jose | Checks passing | 100.00% of 39 checks |
| Frankfurt | Checks passing | 100.00% of 34 checks |
| Tokyo | Checks passing | 100.00% of 21 checks |
| Chicago | Checks passing | 100.00% of 24 checks |
| Toronto | Checks passing | 100.00% of 24 checks |
| London | Checks passing | 100.00% of 24 checks |
| Singapore | Checks passing | 100.00% of 24 checks |
| São Paulo | Checks passing | 100.00% of 24 checks |
Other countries we check Honeycomb from
How we measured this
Australia readings on this page come from RealUptime's own Sydney probe against Honeycomb's public endpoints. They are not user reports, and they are not Honeycomb's own status page.
See Honeycomb's full check readings, the 90-day history by region, or the outage tracker methodology.
Check your own site from Sydney
This page shows what we see when we check this service, using the same ten regions, for a site you run. RealUptime Monitor watches your own servers from inside your network, and it starts free.
Start monitoring your own serversRun a service people depend on? Give them a status page on your own domain, checked every minute from six regions, for $9 a month. Get Starter