Is Gcore down in the US?
Vendor lists an old incident, not shown as liveWhat Gcore reports
Gcore still lists an incident opened on 2026-10-20, last updated 2026-11-03; it has been open past 72 hours, so we do not show it as live.
As of the last successful poll, 2026-11-05 17:59 UTC.
Our regional reading
This is our own reading from outside, shown beside the vendor's statement. It is not counted as a separate outage.
Checks passingin the US, measured from Ashburn and San Jose
All 2 of our probes in the US, in Ashburn and San Jose, read checks passing when they last checked Gcore at Nov 5, 2026, 6:00 PM UTC.
Over the last 24 hours we completed 1038 checks from Ashburn and San Jose and 1038 answered cleanly, 100.00% availability.
Of the 2 other regions we check Gcore from, all 2 read checks passing right now.
Email me when Gcore reports an incident on its status page, and again when it reports it resolved.
What our Ashburn and San Jose probes measured
Last checked Nov 5, 2026, 6:00 PM UTC.
Gcore from Ashburn and San Jose over the last 30 days
Over the last 30 days, Gcore answered our Ashburn probe in 630 ms on average, and 1 check in 20 took longer than 1,124 ms.
Over the last 30 days, Gcore answered our San Jose probe in 687 ms on average, and 1 check in 20 took longer than 1,117 ms.
Ranked by average response time across the 4 cities we check Gcore from, Ashburn 2nd, San Jose 3rd; Frankfurt was fastest at 273 ms and Tokyo slowest at 860 ms.
From Ashburn and San Jose we ran 3,230 checks of Gcore in 4 days, and 3,228 answered cleanly: 99.93% availability.
1 of the 4 days had at least one failed check. The weakest was Nov 3 (UTC), at 99.80% across 1,010 checks.
In Ashburn local time (EST), Gcore was slowest around 12 PM, at 773 ms on average over the last 14 days, and quickest around 9 AM, at 536 ms.
| Day (UTC) | Checks | Availability | Average response |
|---|---|---|---|
| Thu, Nov 5 | 761 | 100.00% | 633 ms |
| Wed, Nov 4 | 1,032 | 100.00% | 627 ms |
| Tue, Nov 3 | 1,010 | 99.80% | 638 ms |
| Mon, Nov 2 | 427 | 100.00% | 790 ms |
Gcore outages measured from the US
Our Ashburn and San Jose probes measured no confirmed Gcore outage in the last 90 days.
How the other regions read right now
Of the 2 other regions we check Gcore from, all 2 read checks passing right now.
| Probe city | Right now | Last 24h |
|---|---|---|
| Frankfurt | Checks passing | 100.00% of 391 checks |
| Tokyo | Checks passing | 100.00% of 244 checks |
Other countries we check Gcore from
How we measured this
The US readings on this page come from RealUptime's own Ashburn and San Jose probes against Gcore's public endpoints. They are not user reports, and they are not Gcore's own status page.
See Gcore's full check readings, the 90-day history by region, or the outage tracker methodology.
The US readings here are taken from that country and show the time of the last one, but Gcore has not yet accumulated enough continuous history for us to publish this page to search engines.
Check your own site from Ashburn
This page shows what we see when we check this service, using the same ten regions, for a site you run. RealUptime Monitor watches your own servers from inside your network, and it starts free.
Start monitoring your own serversRun a service people depend on? Give them a status page on your own domain, checked every minute from six regions, for $9 a month. Get Starter